DZ/T 0120-1994 地质钻探用往复式泥浆泵试验方法
作者:标准资料网 时间:2024-05-05 08:48:45 浏览:9960
来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称: | 地质钻探用往复式泥浆泵试验方法 |
英文名称: | Testing methods for reciprocating mud pump for geologic drilling |
中标分类: | 矿业 >> 地质勘探设备 >> 地质勘探设备 |
替代情况: | 原标准号GB 11795-1989 |
发布日期: | 1989-11-16 |
实施日期: | 1990-07-01 |
首发日期: | |
作废日期: | |
出版日期: | |
页数: | 15页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 矿业 地质勘探设备 地质勘探设备
下载地址: 点击此处下载
【英文标准名称】:Nuclearcomponents
【原文标准名称】:给水用1/2In.(12mm)到2In.(50mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管
【标准号】:ASMECodeCasesNC-2004
【标准状态】:现行
【国别】:美国
【发布日期】:2004
【实施或试行日期】:
【发布单位】:美国机械工程师协会(US-ASME)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:ASMECodeCasesNC-2004,Nuclearcomponents
【中国标准分类号】:Q81
【国际标准分类号】:
【页数】:936P.;A4
【正文语种】:英语
Product Code:SAE J123
Title:Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications
Issuing Committee:Fasteners Committee
Scope: This SAE recommended practice defines, illustrates, and specifies allowable limits for various types of surface discontinuities that may occur or become apparent during the manufacture and processing of bolts, screws, and studs which are primarily intended for use in automotive assemblies subjected to severe dynamic stresses and necessitating use of high strength fasteners having appropriate fatigue-resistant properties. The basic document does not include inspection sampling requirements. It is intended that the purchaser shall specify, in the original inquiry and purchase order, the inspection sampling requirements which the producer must satisfy to demonstrate the acceptability of bolts and screws with respect to surface discontinuities. Appendix A outlines inspection sampling plans applicable when such requirements are not specified by the purchaser in the original injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchasnal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. e order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase pro When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.duction controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.duction controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.duction controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.
Rationale: This SAE recommended practice defines, illustrates, and specifies allowable limits for various types of surface discontinuities that may occur or become apparent during the manufacture and processing of bolts, screws, and studs which are primarily intended for use in automotive assemblies subjected to severe dynamic stresses and necessitating use of high strength fasteners having appropriate fatigue-resistant properties. The basic document does not include inspection sampling requirements. It is intended that the purchaser shall specify, in the original inquiry and purchase order, the inspection sampling requirements which the producer must satisfy to demonstrate the acceptability of bolts and screws with respect to surface discontinuities. Appendix A outlines inspection sampling plans applicable when such requirements are not specified by the purchaser in the original injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchasnal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. e order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase pro When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.duction controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.duction controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.duction controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.
【原文标准名称】:给水用1/2In.(12mm)到2In.(50mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管
【标准号】:ASMECodeCasesNC-2004
【标准状态】:现行
【国别】:美国
【发布日期】:2004
【实施或试行日期】:
【发布单位】:美国机械工程师协会(US-ASME)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:ASMECodeCasesNC-2004,Nuclearcomponents
【中国标准分类号】:Q81
【国际标准分类号】:
【页数】:936P.;A4
【正文语种】:英语
Product Code:SAE J123
Title:Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications
Issuing Committee:Fasteners Committee
Scope: This SAE recommended practice defines, illustrates, and specifies allowable limits for various types of surface discontinuities that may occur or become apparent during the manufacture and processing of bolts, screws, and studs which are primarily intended for use in automotive assemblies subjected to severe dynamic stresses and necessitating use of high strength fasteners having appropriate fatigue-resistant properties. The basic document does not include inspection sampling requirements. It is intended that the purchaser shall specify, in the original inquiry and purchase order, the inspection sampling requirements which the producer must satisfy to demonstrate the acceptability of bolts and screws with respect to surface discontinuities. Appendix A outlines inspection sampling plans applicable when such requirements are not specified by the purchaser in the original injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchasnal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. e order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase pro When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.duction controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.duction controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.duction controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.
Rationale: This SAE recommended practice defines, illustrates, and specifies allowable limits for various types of surface discontinuities that may occur or become apparent during the manufacture and processing of bolts, screws, and studs which are primarily intended for use in automotive assemblies subjected to severe dynamic stresses and necessitating use of high strength fasteners having appropriate fatigue-resistant properties. The basic document does not include inspection sampling requirements. It is intended that the purchaser shall specify, in the original inquiry and purchase order, the inspection sampling requirements which the producer must satisfy to demonstrate the acceptability of bolts and screws with respect to surface discontinuities. Appendix A outlines inspection sampling plans applicable when such requirements are not specified by the purchaser in the original injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchasnal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. e order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.nal injury, purchase order, or in related specifications. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase pro When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate. When the provisions of this document are specified by the purchaser, the fastener manufacturer must significantly increase production controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.duction controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.duction controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.duction controls including machine set up, blank diameters, die lubrication, in-process inspection requirements, and reduced production rate.